PowerCADD to desktop pen plotter

Show us your drawings!
Post Reply
User avatar
lava
Posts: 65
Joined: Fri Nov 20, 2020 6:13 pm
Location: Merchantville, NJ
Contact:

PowerCADD to desktop pen plotter

Post by lava » Sun Jan 01, 2023 3:47 pm

Was gifted one of these desktop pen plotters from a good friend, and did a couple of experiments with it. Its called an AxiDraw. Here is a short video of it in action:

https://www.youtube.com/watch?v=mijJx49_yJw

yes, it will accept any old desktop pen - I'm using a reliable old Pilot ball liner. Will cover up to 11x17 sheet

You can see it is plotting things from back to front - you must use an intermediary vector drawing program - Inkscape - which has a compatible driver, and import your drawing via DXF. There are a few translation errors - geometry nested in library groups sometimes off scale.

This was a floor plan of a Philadelphia row house I had measured earlier this year. I'll also attach still images of some of the prints:
Attachments
Screen Shot 2022-04-28 at 2.21.55 PM.jpg
plan from video
Screen Shot 2022-04-28 at 2.21.55 PM.jpg (135.13 KiB) Viewed 48014 times
Screen Shot 2022-04-28 at 2.22.03 PM.jpg
plan with WildTools squiggle
Screen Shot 2022-04-28 at 2.22.03 PM.jpg (138.84 KiB) Viewed 48014 times
Greg La Vardera
www.lamidesign.com

Post Reply